LAN Setting
This tab allows you to set up LAN IP
gateway address with an option to
enable or disable the DHCP server
feature. You can enter the gateway
address and subnet mask. DHCP
provides and assigns IP addresses,
default gateways, and other network
parameters to client devices. DHCP
server can be enabled or disabled
as per the network requirement.
The following subnets are reserved
for default services. Please do not use
it as a gateway address.
1. 192.168.7.x (IPsec VPN)
2. 192.168.8.x (Open VPN)
3. 192.168.10.x (Guest Wi-Fi)
4. 192.168.20.x (Smart Home Wi-Fi)
10. IPv6
You can setup IPv6 settings
from this tab.
The Predator Connect W6
supports IPv6 mode below:
DHCPv6, static IPv6, PPPoE,
464xlat, 6rd, DS-Lite.
Connection mode will be
disabled by default.
Please consult local Internet
Service Provider before enabling
and configuring the option.
28 28