Table of Contents
Advertisement
6.1
How to create a Mesh network
To create a mesh network,
set one router as a Mesh controller
(A) and set another router as a Mesh
agent (B)
Note: To keep a better performance,
please be aware that a controller could
only have 3 agents under its network.
For the fourth agent, it will be
performed factory reset after
connecting to the mesh network and
switched back to router mode
automatically.
Following are the steps to create a
Mesh network;
1. Go to quick setup and set the main
router as Mesh controller.
2. Power on the other Predator
router and set it as Mesh Agent.
3. Place both routers close to each
other.
There are two ways to onboard an
agent to a Mesh network.
I. Press the WPS button on both
devices for 2 seconds at the
same time.
II. Connect agent to the controller
via LAN cable.
If the agent onboard to a controller
successfully, the LED will be
breathing blue, otherwise, LED will
become solid red color.
13 13
Advertisement
Table of Contents
