Memory - Kenwood TS-790A Instruction Manual

4-4. MEMORY
The TS-790A/790E incorporates a convenient 59
channel memory that can be used to store and recall
commonly used frequencies.
4-4-1. Microprocessor back-up lithium Battery
A lithium battery is contained in the transceiver to re-
tain memory. Turning off and POWER switch, discon-
necting the power cable, or a power failure will not
erase the memory. The battery should last for approx-
imately five years. When the battery discharges, an
erroneous display may appear in the display. Lithium
battery replacement should be performed by an autho-
rized KENWOOD service facility; either your KEN-
WOOD dealer, or the factory, since this unit contains
CMOS type circuitry.
Notes: om
1.When the
lithium battery
is replaced,
the
microprocessor must be reset, using the procedure
in section 4-4-2.
2. When the lithium battery fails, the radio's microcod-
ed functions are not affected. Only information
stored in memory will be cleared.
(With the TS-790A)}
MAIN display SUB display
MHz
~ ~ Frequency
Mode Frequency
Mode
|
144. ~«(VFOAB
144.000.0
|__ AUTO, CW
430.000
_—s«|_— AUTO, FM
430
VFO A.B
430.000
AUTO, FM
OFF
i
[+1200 | VFOAB
| — — — 1240.000
a _ AUTO, FM
430.000
|
—~——AUTO, FM
(With the TS-790E)
MAIN display
SUB display
5
MHz
Frequency
i Mode
Frequency
s Mode
144.
VFO AB 744.000.0
|
AUTO,CW__
430.000.0
| AUTO, Cw
[430
| VFOAB |
430.000.0 _
AUTO, CW
= OFF
_
*1200 | VFO AB
1240.000
AUTO, FM
430.000.0 _
AUTO, CW |
Memory Channel Frequency Mode 4
~~ 00-49 x ehE = Gl
P1,P2,P3" | "a
A, A2,A3* | |
C1 145,000 AUTO, FM
C2 | 433.000 | AUTO, FM
*c3 1295.000 _ AUTO, FM
{*: Optional in the TS-790A/790E.)
34