Kenwood TS-790A Instruction Manual page 18

C. Keyboard
{1) OFFSET/SEL (select) key
(3a
6{ se. |
roc}
TONE.
(With the TS-730A)
> 0.6 « > 16~<
&®—— 8
TONE
Simplex
{no indicator}
»~ 716 ~< > 5.0<
430 MHz
initial state
144 MHz
initial state
35.0 ~—» 33.0 «—» 20.0 ~—» 12.0
1200 MHz
initial state
(With the TS-790E)
> 06 «> |.6 «—> 50<«——> 76 <
144 MHz \ / 430 MHz
initial state) initial state
\ > 35.0 «> 33.0 «—» 20.0 «—> 12.0 «
1200 MHz
initial state
(2) TONE/SEL (select) key
(With the TS-790A)
2: SEL; °
(With the TS-790E)
{TS-790A only}
[2 set,
18
The OFFSET key is used to select the desired trans-
mitter offset during repeater operations. When the key
is pressed, the shift modes cycle from + to ~ to sim-
plex (no indicator).
Caution: ———-—_-_—_-_——_
This key is inoperative when:
© In modes other than FM.
© SUB is selected.
You can select the offset frequency (shift width) with
the TUNING knob or microphone UP/DOWN switch.
Caution: -——_--—_——__- -
This function is inoperative when:
® In modes other than FM.
« SUB is selected.
Caution: —o
This key is inoperative when:
© In modes other than FM.
« SUB is selected.
Caution: ————_—_-_. —__—_
This function is inoperative when:
¢ in modes other than FM.
« SUB is selected.