Kenwood TS-790A Instruction Manual page 20

(6) STEP/SEL (select) key
(7) REV (Reversa)/SP.S (Speaker separate) key
fT sec" (Gl set] féT set]
(8} SPLIT/TRACE key
20
|7 ses |
[7] ses |
"B ITAACE.
Selects the size of the VFO frequency step. (Refer to
section 4-2-6.)
Select the desired frequency step using the TUNING
knob or the microphone UP/DOWN switches.
3.9 ~——> 10.9 «——> 12. an
Caution: — -
This function is operational in FM mode.
When the REV key is depressed it is used to reverse
the transmit/receive frequencies during repeater oper-
ations and split operations.
Refer to Section 4-2-13. Separate speaker for addi-
tional information on this key.
For split frequency operations; A-R, B-T {A receive,
B transmit), or B-R, A-T.
Caution:
This key is inoperative when SUB has been selected.
Used to turn trace function on or off. (Refer to Sec-
tion 4-8. TRACE FUNCTION)