Kenwood CP-J7 Instruction Manual page 7

Parts name <Fig. 1>
Main unit
@ TAPE switch © OPEN button
@ Dolby NR* switch @ Holes for fixing the battery
© VOLUME control knob case
@ OPE/BATT indicator @ Rechageable battery
@ PHONES jack compartment
@ PLAY/DIR button @ S.P.SW. switch
@© STOP button @ HOLD switch
© ° FF/ : REW button
Remote controller
(1) « FF/ : REW button S.P.SW. button
(2) STOP button @) VOLUME control knob
(3) HOLD switch MUTE button
(4) PLAY/DIR button Slide and hold to mute the playback
eer sound, Releasing the button resumes the
© LCD indicator original volume.
Display on the remote controller
2. Operation indicator
A letter goes off slowly in order during playback.
During fast-forward or rewind, the letter goes off in ord-
er rapidly
1. S.P. switch display
When the [S.P.SW.] but-
ton is pressed, the select-
ed mode is displayed.
3. Elapsed time indicators
The lights after about
1 hour after batteries were
replaced.
The lights and beep
sound is heard after
about 2 hours.
e The elapsed time indica-
tion is reset when the
batteries are removed
and installed again.
6. Hold indicator
When the [HOLD] switch
on the remote control is
pressed, this indicator
blinks.
co: Lights in continuous automatic
reverse mode.
—: Lights in one-cycle automatic
reverse mode.
5. Tape direction indicators
Fm: Lights during forward,
"@ R: Lights ri. backward.
When the MUTE button is
pressed, this indicator blinks.
* Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
"DOLBY and the double-D symbo! JJ] are trademarks of Dolby Laboratories Licensing Cor-
poration.
cp-j7 3
We "j a