Kenwood CP-J7 Instruction Manual page 2

important!
USA, Canada, U.K. and Europe
Unit shipped to the above are not equipped
with an AC voltage selector switch and the
discussion of such a switch that follows
should be disregarded.
All other countries
AC adaptor shinped to cauntries other than
the above are equipped with an AC voltage
selector switch on the top cover. Refer to
the following paragraph for the proper set-
ting of this switch.
AC voltage selection
AC adaptor operates on 110~ 1420 volts or
220~ 240 volts AC. Before connecting the
power cord to your AC outlet, make sure that
the setting position of this switch matches your
line voltage. If not, it must be set to your vol-
tage in accordance with the following
direction.
Note: Ce
Our warranty does not cover damage caused
by excessive line voltage due to improper set-
ting of the AC voltage selector switch,
220V —— I 10v
240V 120V
110 ¥-120 V 220 V-240 V
The AC adapter is provided with a voltage
selector switch which has been preset for
220-240 V,
If using it with 110-120 V power, employ @ pin
or screwdriver to set the switch ta the
110-120 V position.
AC voltage selector switch
For United Kingdom
The mains plug must be removed from the wall
socket prior to any internal examination.
Important
The wires in this mains lead are coloured in ac-
cordance with the following code:
The wires in this mains lead must be connected
to the terminals in the plug as follows:
Wire colour Plug terminal marking
N or Black
L or Red
Brown to
Live e )
Blue to —+€ )
Neutral ca)
Plug
Notes: ——_—_————
1} Ifa 13-amp plug ts used, this must be fitted
with a S-amp fuse.
2) Ifa 3-pin plug with earthing contact ts used,
no wire must be connected to the E terminal.
WARNING:
FO PREVENT FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS
APPLIANCE TQ RAIN OR
MOISTURE.