Chapter 1 Preparation - Sony RSE-500 Operating Instructions Manual

Chapter
Preparation
Features
The Video Transmitter can send and receive voice.
pictures and control data via ISDN.
Conventional remote monitoring systems provide only
still images. The Sony Video Transmitter provides
moving pictures for real-time and precise monitoring.
The Video Transmitter system is perfect for the
requirements of the distribution and service industries
demanding monitoring capabilities.
The system requires only one ISDN line
for voice, pictures and control data
High quality images using H.261 compression
technology, voice and control data can be sent or
received simultaneously via one ISDN line. The ISDN
modular jack can be connected directly to the Video
Transmitter.
Picture [Voice — [Controidata |
¡Send [Receive |Send [Receive] Send/Receive |
see e e e |
hsesoo e |- e je 7
O: possible
—: impossible
Relay control and remote diagnostics
From the central site, you can operate a device (e. g.,
turning on lights or opening/closing doors) at a
terminal site or you can monitor voice at a terminal
site.
From the central site, you can diagnose a terminal site
and identify the location of malfunctions or errors,
enabling quick and efficient recovery.
Automatic data transmission upon
detection of alarm signal
Up to 10 remote sites can be registered in one alarm
port. When an alarm signal is detected, data is
automatically transmitted to the registered telephone
numbers.
Automatic camera selection upon
detection of alarm signal
Up to 8 alarm signals can be input into one ALARM
IN port. When an alarm signal is input, the system
switches to the picture related to the port number
which the alarm signal is input.