Setting Up The Tablet Port - Sony RSE-500 Operating Instructions Manual

d fl il
Port Setting
2 Select the baud rate using € or Y. then press
ENTER.
The following screen appears.
INTERFACE :RS-232C
BAUD RATE:9600
CHARACTER BIT:? [8
<CANCEL> «OK»?
a AA
3 Select the character bit using € or ®, then press
ENTER.
The following screen appears.
INTERFACE: RS-232C
BAUD RATE:9600
CHARACTER BIT:8
PARITY BIT:[NONE|
ODD
EVEN
<CANCEL> <OK>
4 Select the parity bit using # or ¥. then press
ENTER.
The following screen appears.
INTERFACE :RS-232C
BAUD RATE: 9600
CHARACTER BIT:8
PARITY BIT: NONE
STOP BIT:1) 1.5 2
<CANCEL> «OK»
5 Select the stop bit using € or %, then press
ENTER.
The setting is registered and the SETTING menu
appears.
1
2
oO oc Aà Q
Setting Up the TABLET Port
Select 25. RS-232C | from the SETTING menu.
The following screen appears.
INTERFACE: ¡TABLET
RS-232C
RS-422A
<CANCEL> «OK»
Select the interface using € or ¥, then press
ENTER.
If you are using the tablet (WACOM ArtPad II for
Windows, not supplied), select TABLET.
The following screen appears.
INTERFACE: TABLET
BAUD RATE: 1200
2400
<CANCEL> «OK»
Select the baud rate using # or ¥, then press
ENTER.
Select the character bit using € or ®, then press
ENTER.
Select the parity bit using # or ¥, then press
ENTER.
Select the stop bit using € or ®, then press
ENTER.
The setting is registered and the SETTING menu
appears.