Table of Contents
Advertisement
6
CAUTION
•
Ensure the charger connector is free from water, humidity, or foreign substances.
•
Do not place the charger near flammable materials during use. Keep it away from carpets and cluttered workspaces.
•
Educate children to prevent them from playing with the device.
•
Users are responsible for adhering to national and local electrical safety standards in the area where the device is
installed.
•
Do not connect or disconnect the connector while charging. Doing so damages the connector, and may damage the
charger or cause the battery to explode.
•
Do not operate the charger with the panel removed or the door open.
•
If the charger is dropped, suffered a severe shock or any other type of damage, do not operate it. Call a service
manager.
•
In dusty environments, more frequent maintenance is required for maximum device lifespan and optimal performance.
•
Do not use the charger during heavy rain or lightning.
•
Electric shock accident: There is a risk of electric shock. Hazardous electrical energy is stored in the capacitor. Even if
the electric supply to the charger is cut off, do not open the charger case for at least 5 minutes after disconnection.
•
Ensure that the power supply to the charger is off before proceeding with charger maintenance procedures.
•
To reduce the risk of fire, connect only to a circuit provided with 60 amperes maximum branch circuit overcurrent
protection in accordance with the the applicable National Installation Codes in Annex A, Ref. 1 .
•
Do not use this product if there is any damage to the unit.
WARNING
•
GROUNDING INSTRUCTIONS : This product must be connected to a grounded, metal, permanent wiring system, or an
equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding
terminal or lead on the product
•
SAVE THESE INSTRUCTIONS
Advertisement
Table of Contents
