Table of Contents
Advertisement
12
INSTALLATION INSTRUCTIONS
•
Do not expose the charger to rain, high temperatures, dust, corrosive gases, flammable
Caution!
substances, or explosive gases.
Installation Location
WARNING
Risk of explosion. This equipment has arcing or sparking parts that should not be exposed to flammable vapors. This
equipment should be located at least 460 mm (18.1 inches) above the floor.
1) When the device installed outdoor
This device shall be mounted at a sufficient height from grade such that the height of the storage means for the
coupling device is located between 600 mm (23.6 inches) and 1.2 m (3.9 feets) from grade.
2) When the device installed indoor
This device shall be mounted at a sufficient height from grade such that the height of the storage means for the
coupling device is located between 450 mm (17.7 inches) and 1.2 m (3.9 feets) from grade.
•
For optimal performance and maximum lifespan, choose your installation location carefully. Operational lifespan and
performance are affected by the location of the charger.
•
Choose a dry area with good ventilation.
•
To reduce the risk of fire, install the charger on a non-combustible surface made of concrete, stone, brick, or iron.
•
Do not block the front of the charger.
•
Install the charger at a height of 0.6 to 1.2 m (1.9 - 3.9 feets)above the ground.
•
Install in a location equipped with an earth leakage circuit breaker.
•
Do not expose the charger to rain, high temperatures, dust, corrosive gases, flammable substances, or explosive
gases.
•
Install a certain distance from the parking space to prevent damage from parked vehicles.
Advertisement
Table of Contents
