Sony CMT-HPZ9 Operating Instructions Manual page 26

-- Power Saving Mode
The clock display can be turned off to minimize
the amount of power consumed during standby
(Power Saving Mode)•
Press DISPLAY repeatedly while the
system is off until the clock display
disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
cyclically as R)llows:
Clock display": --+ No display (Power Saving
Mode)
:- The clock is displwed only if you set the clock•
Note
You cannot 1)erl_rmthe follm_ ing operations in Pm_er
Saving Mode•
setting the clock
changing the AM tuning inter'_al (except 12_r
European model)
changing the CD power manage fimction
Tips
• STANDBY indicator lights up even in Pm_er Saving
Mode•
• The timer continues to operate in Power Saving
Mode.
You can check the playing time and remaining
time of the currenl track or that of the disc.
When an ATRAC CD or MP3 CD is loaded, you
can also check the inR_rmation recorded on disc,
such as the titles•
Checking the remaining time
and titles
Press DISPLAY during Normal Play.
Each time you press the button, the display
changes cyclically as follows:
Current lrack number and elapsed playing time
---+ Current track llutllher alld remainillg time or
,, . --,l) ._.+ Remaining time of the disc or
"'2) + Track title (ATRAC CD and MP3
CD 4)only) ----+Group llall-Je3)4)----+Clock display
(for eight seconds) --+ Bass level (%r eight
seconds) --+ Treble level (for eight seconds)
i) For MP3 CDs
2/ , . " appears for ATRAC CDs, MP3 CDs or
when the audio CD is in a play mode other than 1
DISC Play.
3) For ATRAC CDs and MP3 CDs
4) When you play back a Irack with an ID3 tag ver. 1
or vet. 2, the ID3 tag ittl\_rmation appears• The ID3
tag displays the track title, album name and artist
name information.
Note
When _st _rward or _st reverse is per_rmed, elapsed
plwing time and remaining time of the track may not
be displayed accurately•
26GB