Sony CMT-HPZ9 Operating Instructions Manual page 17

6
Program additional discs or tracks.
To program Repeat steps
Other discs 3 and 5
Other trackson the 4 and 5
same disc
Other tracks on 3 to 5
other discs
7 Press I_- (or CD [2>1111 on the unit).
Program Play starts.
Using the jog dial
Use butlOllS Oil the unil lor the operalion.
1
Press FUNCTION repeatedly to switch
the function to CD.
_, Press PLAY MODE repeatedly in stop
mode until "PGM" appears.
3 Press DISC SKIP/EX-CHANGE
repeatedly to select a disc in stop
mode,
4
5
6
7
Turn the jog dial to select the desired
track.
To progrmn tracks on the ATRAC CD or
MP3 CD, turn the jog dial to first select the
desired group, then press PUSH ENTER
before performing slep 4.
Press PUSH ENTER.
The track is programnted.
The program step number appears,
lollowed by the last programmed track
number and total playing time.
To program additional tracks, repeat
steps 3 through 5.
Press CD E>-II_.
Program Play starts.
Other operations
To Do this
Cancel Program Play Press PLAY MODE
repeatedly in stop mode
until PGM" disappears.
Erase the program Press CLEAR in stop
mode. Each time you press
Ihe button, a track is cleared
from the end of the
program.
Add a track to the end of Perform steps 4 and 5 in
the program stop mode.
Notes
• You cannot erase Ihe progrmn during playback.
• You cannot program the tracks on other discs by
using the jog dial.
Tips
• You can program the tracks during playback hy using
the jog dial.
• The program you made remains afler Program Play
finishes. To play the same program again, press CD
(or FUNCTION repeatedly) to switch lhe function to
CD, then press _ (or CD [2:>11D on the unit).
However, the program is cleared when you eject the
disc.
• " . " appears when the total program time
exceeds 100 minutes, or when you select a disc wilh
21 tracks or more, or when you select an
ATRAC3plus/MP3 track.
O
I
"O
E
17G8