Clean the inside of the detergent
10.
drawer housing.
Push in the detergent drawer.
11.
Appliance settings
Q
Appliance settings
Y ou can change the following settings
A p p l i a n c e s e t t i n g s
in the control and display panel:
The volume of the information signal
■
(e.g. at the end of the programme),
The volume of the operating signals,
■
The brightness of the operating and
■
display field,
Select/deselect the memory function
■
for drum care.
You will need to activate the setting
mode in order to change these settings.
Activating the setting mode
Switch on the appliance. The
1.
settings for the current programme
are displayed.
Touch the control panel œ.
2.
The setting mode is activated and the
displays for the information signals U
and the preset volume light up.
You can now change the settings:
Changing the signal volume
To do this, touch N or M on the control
panel until the required adjustment
value for the volume of the information
signals appears:
Adjustment values:
0
off
1
quiet
2
Medium
3
loud
4
very loud
Exit setting mode or:
Touch œ again. The display for the
operating signals C and the preset
volume light up.
Touch N or M to change the
adjustment value (as above).
Exit setting mode or:
en
43