Table of Contents
Advertisement
Home Connect
en
Resetting your network
settings
You can reset all of the network
settings.
Ensure that you are in the Home
Connect menu. ~ Page 33
Set the programme to position 5.
1.
§"† (reset network settings)
appears in the display.
Press A.
2.
¢"à appears in the display.
Press A.
3.
If you want to operate your
Note:
appliance via the Home Connect app
again, you will need to reconnect it to
your home network and to the
Home Connect app.
Updating the software
You can update the Home Connect
software on your appliance. As soon as
a new software update is available, a
note appears in the display: —˜š
Install the update directly via the
message in the display or manually as
follows:
Ensure that you are in the Home
Connect menu. ~ Page 33
Set the programme to position 6.
1.
36
—˜š (software update) appears in
the display. Start/Pause A flashes if
a software update is available.
Press A.
2.
¢"à appears in the display.
Press A.
3.
The software update may take
Note:
several minutes. Do not switch the
appliance off while updates are being
installed.
Remote diagnostics
If a fault occurs, the after-sales service
can use remote diagnostics to access
your appliance.
Contact the after-sales service, making
sure that your appliance is connected to
the Home Connect server and checking
that the remote diagnostics service is
available in your country.
For more information and to
Note:
check whether the remote diagnostics
service is available in your country,
please visit the Help & Support area of
the Home Connect website for your
country: www.home-connect.com
Advertisement
Table of Contents
