Operator Controls; Power Button; Configurable Function Keys - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

Bottom view
①
1.3.2

Operator controls

1.3.2.1

Power button

The Power button is on the right of the device, see section Exterior design (Page 10).
Then Power button (power) has the following functions:
• Switch on the table, press power button until the power indicator is on.
• Set the tablet to sleep, press power button once shortly
• Resume tablet working from sleep, press power button once shortly
• Switch off the tablet without shutting down the Microsoft Windows in event of a fault,
press power bottom for 10 seconds until the power indicator is off.
Hold the On/off button for approximately 1 second. The response depends on the setting of Windows power
1
option.
1.3.2.2

Configurable function keys

<F1> and <F2> function keys have the following functions:
• They simulate commonly used keyboard inputs
• You can configure frequently used tablet functions to them, for example, function for
calling the camera.
• The same key or key combination has different functions depending on what phase the
device is in
MD-34A
Operating Instructions, 08/2023, A5E52427535-AA
Interface for docking station
Product description
1.3 External design of the device
.
1
.
1
13