8.10 Connector Conversion Adapter
GT10-9PT5S type connector conversion adapter enables an easy crossover wiring for the multi-drop-
conncted GOTs.
For the wiring between the connector conversion adapter and the controller, refer to the following manual.
GOT1000 Series Connection Manual
(1) GOTs supporting the connector conversion adapter
(2) Checking method of hardware version
8.10.1 Applicable connector conversion adapter
The following connector conversion adapter is applicable.
Model
GT10-9PT5S
8.10.2 Installing procedure
Turn the GOT power off.
1
Connect the connection conversion adapter to the RS-422/485
2
interface on the GOT.
Fix the connection conversion adapter to the GOT using the
3
provided M3 tapping screws.
Tightening torque: 0.3 to 0.6 N
4
The followings are the GOTs compatible with the connector conversion adapter.
GOT
GT1155-QTBD
GT1155-QSBD, GT1150-QLBD
Confirm the hardware version with the products rating plate.
GRAPHIC OPERATION TERMINAL
GT1155-QSBD
MODEL
IN 20.4
26.4VDC POWER 9.84W MAX
S/N
540001 BC
MITSUBISHI ELECTRIC CORPORATION
MADE IN JAPAN
For GOT multi-drop connection
m
•
Hardware version
Hardware version C or later
Hardware version F or later
BC
Hardware version
Contents
8.10 Connector Conversion Adapter
8.10.1 Applicable connector conversion adapter
1
2
3
4
5
6
7
8
8 - 19