10.1.3 Description of communication setting screen
Name of setting item and display item columns for [Communication Setting]
(1) Channel - Driver assign
(a) Assigning channel No.
Channel No.s can be assigned to each of the communication drivers installed in the GOT.
Without setting [Communication Settings] in drawing software, communication with PLC CPU
is only available after assigning a channel No. with this function.
(b) Changing communication driver
The communication driver assigned to the channel can be changed using the communication
setting.
(To change the communication driver, it is required to pre-install the communication driver to
be changed in the GOT.)
(2) Standard interface display box: Communication interface included as standard in GT11
(a) GT1155-QTBD, GT1155-QSBD, GT1150-QLBD
The standard interface includes the following three types.
RS232 ....For communication with PC (drawing software), PLC, microcomputer, bar code reader,
RS422 ....For communication with PLC and microcomputer
USB........For communication with PC (drawing software)
USB interface (Standard interface) (mini)
10 - 2
10.1 Communication Setting
10.1.3 Description of communication setting screen
(3)
(3)
(3)
RFID and other equipment
[GOT front face]
(2)
(4)
(2)
(4)
(2)
(4)
Section 10.1.4 Operation of communication setting
RS-422 interface (Standard interface)
RS-232 interface (Standard interface)
(1)
[GOT rear face]