○ Operation timeout function
If no operation is made for one minute or more while the converter is in the setting mode, the
mode automatically returns to the measurement mode unless the parameters are displayed on
the screen.
Menu screen
Parameter check screen
Parameter change screen
(Parameters
changed.)
7.3.2 Setting and Calibration
In the setting mode, you can select items, or check or change the setting values as described below.
When you push
to move the digit, you can execute continuous operation by holding down the relevant
switch longer. (Holding down the switch longer automatically executes the operation continuously.)
● Moving to the menu screen
Switch operation
SET
A:DETECTOR
1 EXC CUR
2 SIZE
3 EXC FREQ
4 FLOW DIR
5 EXIT
EXC CUR
A
ESC
EXC CUR
are
being
A
or
to scroll up or down the numeric value or alphabet, or when push
Display example
PUSH SW
CNT:
CNT CTRL
SET:
SET MODE
CNT
ESC
MENU SEL
BASIC
DETAILED
PREVIEW
ZERO ADJ
PLS SET
ESC
When no operation is made
for 1 minute, the mode
automatically returns to the
measurement mode.
ESC
0.2000
The screen does not return
to the measurement mode.
0.2000
Mode change screen
SET
Pushing
SET
takes you to the menu configuration
selection screen.
For
configuration,
DETAILED menu.
− 45 −
6 F 8 A 0 9 2 7
Description
in the measurement mode
select
BASIC
or