Toshiba 3890CS User Manual page 151

Troubleshooting
Action
Step 2
a
Check if the power cord is connected properly to the printer
and the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire
or electrical shock, connect the power cord to an
appropriately rated and properly grounded electrical outlet
that is near the product and easily accessible.
b
Copy or scan the document.
Is the scanner responding?
Step 3
a
Turn off the printer, wait for about 10 seconds, and then turn it
back on.
b
Copy or scan the document.
Is the scanner responding?
Adjusting scanner registration
1
From the control panel, navigate to:
Settings > Maintenance > Configuration Menu > Scanner Configuration > Scanner Manual Registration
2
From the Print Quick Test menu, touch Start.
3
Place the Print Quick Test page on the scanner glass, and then touch Flatbed Registration.
4
From the Copy Quick Test menu, touch Start.
5
Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are different from the original document, then adjust Left Margin and
Top Margin.
6
Repeat step 4 and
Adjusting ADF registration
1
From the control panel, navigate to:
Settings > Maintenance > Configuration Menu > Scanner Configuration > Scanner Manual Registration
2
From the Print Quick Test menu, touch Start.
3
Place the Print Quick Test page on the ADF tray.
4
Touch Front ADF Registration or Rear ADF Registration.
Notes:
•
To align Front ADF Registration, place the test page faceup, short edge first into the ADF.
•
To align Rear ADF Registration, place the test page facedown, short edge first into the ADF.
step 5 until the margins of the Copy Quick Test page closely match the original document.
Yes No
The problem is Go to step 3.
solved.
The problem is Contact
solved. support.
151
customer