Monitor Image; Plug-In Free Viewer - Sony SNC-WR600 User Manual

If you select a thumbnail when registering a preset
position, it will be displayed with a thumbnail.
Select the Preset position name from the list. The camera
will move to the preset position that you have stored in
memory using the Preset position menu.
Other panel
The Other panel is displayed in the case of an H.264
image.
You can switch between TCP and UDP (Unicast/
Multicast).
Each click switches the transmission mode of the video/
audio data between TCP mode, Unicast mode, and
Multicast mode (page 18).

Monitor image

The image shot by the camera is shown here.
There are two modes for on-screen pan/tilt/zoom
operation using a mouse: Area zoom mode and Vector
dragging mode.
In the Area zoom mode, click to adjust the camera
direction to the center of the image.
The Area zoom will move the camera in the direction
that displays the area selected by the operator and zooms
in at the same time. The operator can choose a part of the
image to view and zoom in by surrounding an area with
a frame by dragging the mouse.
In the Vector dragging mode, the camera moves to the
dragged direction. How long you drag the mouse
determines the speed. Releasing the button on the mouse
after dragging stops the panning or tilting of the camera.
14
Configuration of Live Viewer
You can also use the camera control panel bar to change
the camera direction.
The zoom operation using the mouse wheel is available
in all modes.

Plug-in free viewer

Live viewer using Plug-in free viewer
Display sample:
Monitor screen
Control bar
Monitor screen
There are two modes for on-screen pan/tilt/zoom
operation using a mouse: Area zoom mode and Vector
dragging mode. A control bar is displayed on the screen.
In the Area zoom mode, click to adjust the camera
direction to the center of the image.
The Area zoom will move the camera in the direction
that displays the area selected by the operator and zooms
in at the same time. The operator can choose a part of the
image to view and zoom in by surrounding the area with
a frame by dragging the mouse.
In the Vector dragging mode, the camera moves to the
dragged direction. How long you drag the mouse
determines the speed. Releasing the button on the mouse
after dragging stops the panning or tilting of the camera.
You can also use the tool bar to change the camera
direction.
The zoom operation using the mouse wheel is available
in all modes.