Home Connect - Siemens EZ9 KZ Series Information For Use

Setting Description and options
Childproof You can use this function to automat-
lock ically lock the hob to prevent chil-
dren from using the appliance
without supervision.
quickStop Allows the cooking zone to be
function switched off quickly and directly via
the main display.
Brand logo You can use this function to set
whether the brand logo is to be dis-
played when you switch on the hob.
reStart You can use this function to set how
long the appliance saves the most
recently used settings when you
switch off the appliance.
Power limita- This enables you to limit the total
tion power of the hob, if required, due to
the circumstances of your electrical
installation. The available settings de-
pend on the maximum power of the
hob. You can find precise informa-
tion on the rating plate. If the function
is switched on and the hob has
reached the set power limit, ​ ⁠ is dis-
played and you cannot select a
higher power level.
21 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
Home Connect.
¡ Please also follow the instructions in the Home Con-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Hobs are not designed to be left unattended. Al-
ways monitor the cooking process.
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
Setting Description and options
Cooking Add a new wireless cooking sensor.
sensor
Setting the You can enter your height above sea
boiling point level to improve the cooking sensor's
accuracy.
Cookware test You can use this function to test the
quality of the cookware.
Appliance in- You can use this function to call up
formation information about the appliance.
Factory set- Reset all settings to the factory set-
tings tings.
20.2 Calling up basic settings
Requirement: All cooking zones must be switched off.
1.
Open the docking menu.
2. Touch ​ ⁠ .
3. Drag your finger to scroll through the available set-
tings.
4. To call up the submenu and select the required op-
tion, touch a setting.
To return to the previous menu, touch
submenu.
5. Before you exit the basic settings, save or cancel
the settings in the confirmation screen.
6. Touch ​ ⁠ to exit.
21.1 Setting up Home Connect
Requirements
¡ The appliance is connected to the power supply and
is switched on.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
1.
Download the Home Connect app.
2.
Open the Home Connect app and scan the follow-
ing QR code.
3. Follow the instructions in the Home Connect app.
Home Connect en
​ ⁠ within a
21