Siemens EZ9 KZ Series Information For Use page 19

Notes
¡ Do not use hard or rough objects such as bristle
brushes or scouring pads to clean the hob, and do
not use scouring agents.
16 powerMove Pro
This allows you to change the power level during cook-
ing simply by moving the cookware forwards or back-
wards.
Activating this function will display the preset power
levels for the item of cookware. Depending on the posi-
tion of the cookware, you can select one of the five
available power levels:
You can change the preset power levels in the basic
settings.
→ "Basic settings", Page 20
Note: If the function does not activate when you select
the power level, the appliance may have reached its
maximum power consumption. You can find more in-
formation about this under Power limitation.
→ "Basic settings", Page 20
16.1 Switching on powerMove Pro
1.
Place the cookware on the cooking surface.
2. Touch ​ ⁠ in the main view. You can select the re-
quired cooking zone on the screen.
3.
Touch the required cooking zone display.
a The function is switched on.
​ ⁠ , 3.0 5.0, 7.0 and 9.0.
¡ Do not touch the wireless cooking sensor with your
fingers; this will soil or scratch it.
15.6 Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the appli-
ance with wireless cooking sensor function meets the
basic requirements and other relevant provisions of the
Directive 2014/53/EU.
A detailed Declaration of Conformity in accordance
with Directive RED can be found at siemens-home.bsh-
group.com on the product page for your appliance un-
der "Additional documents.
The logos and the Bluetooth® brand are registered
trademarks and property of Bluetooth SIG, Inc. These
trademarks are used by BSH Hausgeräte GmbH under
licence. All other trademarks and trade names are
owned by the respective companies.
4. Move the cookware over the cooking zone until the
power level you require is set. The selected power
level is displayed in the cooking zone display.
Notes
¡ If the function is not available for the cookware you
want to use, an audible signal will sound and the
function will not be activated.
¡ If the function is not available for any of the cook-
ware that is placed, ​ ⁠ does not appear on the main
display.
Changing the power level
You can change the power levels while you are cook-
ing. To change to or select a different power level in
the programming area, touch the area for which you
want to change the power level.
Note: If you deactivate the function, the power levels re-
turn to the preset values.
16.2 Switching off powerMove Pro
▶
Touch the cooking zone indicator on the main dis-
play until the power level 0.0 appears.
a The cooking zone is switched off.
a The function is switched off.
powerMove Pro en
19