Compatibility Test - Bosch Rexroth VAK 41.2 Manual

4-2
Technical Data
CE Marking
UL/CSA Certification
4.3

Compatibility Test

Note: Concerning delivered VAK keypads all CE requirements are
fulfilled.
The devices of the VAK family are certificated according to
• UL508 (Industrial Control Equipment) and
• C22.2 No. 14-M95 (CSA)
However, it is possible that there are combinations or extension stages
with restricted or missing certification. Thus, verify the registration
according to the UL marking on the device.
Note: To guarantee an UL/CSA-compliant operation, you have to
fulfill the following conditions:
• Use 60/75 °C copper wire only.
• Use Class 1 wire only or equivalent.
Note: The UL/CSA marking is only valid for the device in its delivery
status.
All Rexroth controls and drives are developed and tested according to the
latest state-of-the-art.
As it is impossible to follow the continuing development of all materials
(e.g. lubricants in machine tools) which may interact with our controls and
drives, it cannot be completely ruled out that any reactions with the
materials used by Bosch Rexroth might occur.
For this reason, before using the respective material a compatibility test
has to be carried out for new lubricants, cleaning agents etc. and our
housings/our housing materials.
VAK 11.2 / VAK 41.2
DOK-SUPPL*-VAK*11/41**-PR02-EN-P