Page 2
Thank You Thank you for making BLUETTI a part of your family. From the very beginning, BLUETTI has tried to stay true to a sustainable future through green energy storage solutions for both indoor and outdoor use while delivering an exceptional eco-friendly experience for our homes and our world.
The user manual contains instructions and notes on the operation and use of this unit. BLUETTI recommends that you use genuine accessories from BLUETTI. BLUETTI shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the BLUETTI.
Safety Instructions Failure to follow these guidelines may cause damage to your unit and injury to yourself or others. Keep this unit away from fire, humidity and dust. Make sure the place where you are using the unit is well ventilated and spacious. DO NOT place the unit on an unstable or tilted surface.
What's In The Box Standard Packaging EB3A Portable Power Station Warranty Card AC Charging Cable User Manual * Below accessories are not included in standard packaging and can be purchased at https://www.bluettipower.com/. Car Charging Cable Solar Charging Cable USB-C to USB-C Cable * AC Charging Cable: 71in/180cm.
Product Overview Diagram 1. Cigarette Lighter Port 8. LCD Screen 2. DC5521 Port 9. LED Lamp 3. DC Power Button 10. LED Lamp Button 4. DC Input Port 11. USB-C Port 5. AC Input Port 12. USB-A Port 6. AC Circuit Breaker* 13.
Current 8.5A Max. Note: EB3A supports a 268W Max. AC input by default. When operating at a temperature of 10-40 you can set the Turbo Charging on BLUETTI App and get a 430W Max. input. EB3A also supports 430W Max. PV + AC dual charging. Solar power serves as the primary power...
Powering On/Off Powering on: Press and hold the AC/DC Power Button for 1s to start up corresponding output. Green light(on the button) LCD Display Note: Please turn on the DC power to enable the wireless charging. Press any button, the LCD screen will stay on for 30 seconds. Powering off: Press and hold power buttons to shut down corresponding output.
UPS Bypass Mode: Connect the EB3A with the AC power and the ‘UPS’ will be on display. Then turn on the AC output. When on this mode, the AC power will directly support the loads on AC output ports and charge the EB3A.
Download BLUETTI App from Google Play or App Store and press ‘ Connected’ to pair with the unit. Note: Press ‘ ’ to customize your settings. Keep your phone no more than 5m/16.4ft away from the unit during the update.
Page 13
Solar Charging Cable Car Charging Connect the EB3A directly to the vehicle plug-in cigarette lighter port via the car charging cable. Car Charging Cable OCV: Open circuit voltage. The maximum voltage that the solar panel can produce with no load on it.
Generator Charging Connect the EB3A with the generator via the AC charging cable. AC Charging Cable Note: Please select the generator with compliant and stable voltage. Discharging Iphone13 MacBook Drone 12-17 Times 5-6 Times 5-6 Times 13Wh 49.9Wh 43Wh Camera...
Q: How can I turn on the UPS Bypass Mode and what dose it mean? A: Connect the EB3A with the AC power and the 'UPS' will be on display. Then turn on the AC output. When on this mode, the AC power will directly support the loads on AC output ports and charge the EB3A.
Technical Support Should you require any further assistance, please do not hesitate to contact BLUETTI service team. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.