Specifications - Panasonic BM-ET200 Operating Instructions Manual

Specifications

General
1
Power source * :
Power consumption:
Ambient operating temperature:
Ambient operating humidity:
Dimensions:
Weight:
Interface:
Network:
Network protocol:
Available card reader:
Recommended junction box:
Input/Output
Recognition result output1 (ACCEPT):
Trigger input (recognition start):
Audio output (Pre-out):
Note: Connect the audio output cables to the stereo speakers equipped with the audio amplifier. (When connected to a
monaural speaker, no sound may be heard.)
High speed serial interface:
Interface board
Interface (card reader):
Wiegand power output (card reader):
Wiegand DATA0 input (card reader):
Wiegand DATA1 input (card reader):
RS-485 (A), (B) (card reader):
Interface (access control panel):
Wiegand power input
(access control panel):
Wiegand DATA0 output
(access control panel):
Wiegand DATA1 output
(access control panel):
Wiegand ACCEPT-LED input
(access control panel):
Wiegand REJECT-LED input
(access control panel):
RS-485 (A), (B) (access control panel):
Alarm output1 (tamper detection):
Alarm output2 (power status):
Recognition result output2 (REJECT):
Buzzer input:
Time adjust input:
Option camera (Not supplied to the iris reader)
Video output:
12 V DC/24 V DC
14.4 W
0 °C to +40 °C {32 °F to 104 °F}
30 % to 90 %
203 mm (W) x 190 mm (H) x 65 mm (Moving part: 77 mm) (D)
{8 in. (W) x 7.48 in. (H) x 2.56 in. (Moving part: 3.03 in.) (D)}
0.9 kg {1.98 lbs.}
6
Wiegand, RS-485 *
10 Base-T/100 Base-TX (Auto negotiation) *
TCP/IP
RWK400 (Manufactured by HID Corporation) *
Two-gang junction box
Non-voltage make contact output, Normally Open, Pulse width: 0.1 s to 60 s,
24 V DC, 100 mA (Max), ON resistance 6 Ω
0 V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more
φ3.5 mm stereo mini plug (10 kΩ, –16 dBV)
Numeric key, external storage device*
Wiegand, RS-485 (Either can be selected.)
5 V DC, 100 mA (Max)
0 V to 5 V DC, 25 mA (Max), Active low
0 V to 5 V DC, 25 mA (Max), Active low
Differential input: ± 0.2 V or more, Differential output: ±2 V or more (When termina-
6
tion is ON)*
Wiegand, RS-485 (Either can be selected.)
5 V DC (No connection available)
0 V to 5 V DC, 25 mA (Max), Active low
0 V to 5 V DC, 25 mA (Max), Active low
0 V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more
0 V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more
6
Differential* input: ± 0.2 V or more, Differential output: ±2 V or more (When termina-
6
tion is ON) *
Open collector output, Normally Open, Active low, 24 V DC, 24 mA (Max)
Open collector output, Normally Close (Low level), 24 V DC, 24 mA (Max)
Open collector output, Normally Open, Active low, Pulse width: 0.1 s to 60 s, 24 V
DC, 24 mA (Max)
0 V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more
0 V to 5 V, 24 mA (Max), Active low, Pulse width: 100 ms or more*
1.0 V [P-P]/75 Ω, composite (NTSC)
2
7
5
5
83