I How To Carry Out Pin Recognition (For Use With Stand-Alone Mode Only) - Panasonic BM-ET200 Operating Instructions Manual

Notes:
• If the recognition becomes invalid frequently, refer to "Troubleshooting" (p. 80).
• Depending on capturing conditions, it will take approx. 10 seconds between capturing and recognition.
• The recognition result will be transferred to the access control panel, accompanied by the user information such as the ID
data, etc.
I How to Carry Out PIN Recognition
When iris reader recognition is unavailable in the stand-alone mode, it is possible to carry out recognition by comparing the ID
and PIN (Personal Identification Number) entered from the optional numeric key.
Refer to p. 32 for details on available devices and connections.
• ID: 2-digit numbers that cannot be changed.
• PIN: 4-digit numbers that can be changed. (Refer to page 76.)
Important:
• Do not forget the ID and PIN. If you forget the ID or PIN, refer to the system administrators or users with the operator's privi-
lege.
• Depending on the settings by the system administrators, voice guidance may not be output.
Note: If no operation has been performed for 30 seconds or more, the iris reader will return to the status before operation. In
this case, retry the operation.
Iris reader
The following is how to carry out the PIN recognition using the numeric key.
Note: When the [BS] key is pressed, operations performed since the [ENTER] key has been pressed last time can be can-
celed.
In the following example, ID is "12", and PIN is "3456".
No.
Press [/] [1] [2] [3] [4] [5] [6] [enter].
• When the input is valid, the voice guidance will say, "Identification completed."
• When the input is invalid, the voice guidance will say, "Sorry you were not identi-
1
fied."
• When the input is mistaken*, the voice guidance will say, "Registration has been
failed."
* ID may be invalid, deleted, not registered, or the PIN recognition may be not allowed, etc.
= / *
clear
7 8 9 –
4 5 6 +
1 2 3
0 , . enter
Numeric key
(For Use with Stand-Alone Mode Only)
Procedure
reject accept
reject accept
75