Panasonic BM-ET200 Operating Instructions Manual page 11

• The settings of this apparatus are configured by the
setup PC or iris server.
The operational setting of stand-alone mode is config-
ured using the setup PC. The operational setting of net-
work mode is configured
Administration Software BM-ES200, which is to be
installed in the iris server.
Depending on the settings, the voice guidance will not
be output or the live indicator will be off at all times.
Refer to system administrators for details on settings.
* If the previous version of Administration Software (BM-
ES300, BM-ES300A, or BM-ES330) is installed on the
iris server, you cannot set up iris readers or distribute
iris data from the iris server to iris readers.
• Take care not to pinch your hands or fingers
between the front panel and the body of this appara-
tus. That may cause injury.
• When the front panel is damaged, refer to the dealer.
It may affect iris image capturing and cause invalid
recognition.
• Avoid placing a receptacle that contains liquid such
as water.
When the liquid falls over the apparatus, it may cause a
fire or electric shock.
• Follow all instructions. Otherwise, our liability will
be limited.
For details, refer to "Limitation of Liability" (p. 4).
• Time adjustment
This apparatus has the inner clock. In the network
mode, the time of inner clock is synchronized to the iris
server once every hour.
While this apparatus is being used in the stand-alone
mode, adjust the inner clock time manually, or connect
this apparatus to an external master clock.
The time gap of 1 minute or more per month might be
caused by operating conditions.
using the optional
11