General Description And Intended Use; Assembly And Commissioning; Mandatory Pre Requirements; Installation Requirements - Bosch PLS User Manual

Parking lot sensor
Hide thumbs Also See for PLS:
Table of Contents

Advertisement

Parking Lot Sensor | PLS

1 General description and intended use

The Parking Lot Sensor (PLS) with TPS110 sensor core ("the Product", or "PLS") is designed for detecting parked light
vehicles in parking lots. This user manual is valid for the PLS with TPS110 sensor core by Robert Bosch France SAS.
The Parking Lot Sensor with TPS110 sensor core is not designed for use in life-sustaining applications, safety-critical
applications or applications for which a malfunction could lead to bodily harm, death or severe property damage. The
Parking Lot Sensor with TPS110 sensor core is not designed for detection of heavy vehicle.

2 Assembly and commissioning

2.1 Mandatory pre requirements

Network infrastructure is not included in the scope of delivery. Before installing the sensors, please ensure that an
adequate and sufficiently robust network infrastructure is available and working properly, namely: the LoRaWAN
backend and the associated management software are functional, the gateways are switched on and there is a stable
Internet connection established between the gateways and the backend.

2.2 Installation requirements

Read carefully and keep the user manual for future reference. The Product, as referenced in this
manual, comprises the complete hardware components for the Parking Lot Sensor, including the Cap,
Screw, Core and Base.
Follow these instructions and all information.
⇒ The Customer must comply with all applicable laws and regulations for the installation and
operation of the Product, and if necessary, obtain necessary approvals. The Customer must take
appropriate measures to avoid injury of third parties, for example, by them tripping over the Product.
Therefore, the Product should only be installed in a clearly designated parking space and should not,
for instance, be installed on the sidewalk.
Prior to starting the installation work, please ensure that all Product components (see Fig. 1 Parking Lot Sensor with
TPS110 sensor core), as well as required tools and material, are readily available.
Figure 1 Parking Lot Sensor with TPS110 sensor core
© Robert Bosch France SAS 2022. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the
event of application for industrial property rights. Data subject to change without notice. Printed in France, December 2022.
Warning
3 | 18
1 Cap
2 Screw
3 Core (sensor TPS110)
4 Base (sensor base)

Advertisement

Table of Contents
loading

Table of Contents