Table of Contents
Advertisement
1 Scope of delivery
The sensor device and the operating instructions are included in the scope of delivery.
Cable and fi xing material is not included.
2 General product description
All values given in this technical documentation are typical values, measured in a certain context. Deviations to these values
can be observed.
2.1 Main functions and properties of the product
The Intelligent Vibration Analysis Sensor (IVAS) is a compact and robust sensor device equipped with two MEMS acceler-
ation sensors – for high bandwidth and high-resolution vibration measurements. Furthermore, it integrates seamlessly into
existing communication infrastructure and offers the possibility to implement use case specifi c algorithms on the sensor
device. IVAS-ETH enables predictive maintenance through vibration-based condition monitoring. By analyzing the frequency
spectrum created by machines and other moving parts e.g. in pumps, motors, linear drives or ventilation systems, it is pos-
sible to assess the wear of bearings and other components. This effectively allows the prevention of unplanned standstills.
For process monitoring, this technique enables an integrated continuous quality control and gives the information to set the
optimal process parameters.
Other applications, uses or specifi cations must be imperatively evaluated and released by Bosch Connected
Devices and Solutions (BCDS).
Communication with the gateway is done via Ethernet (see chapter 4.).
Power supply is ensured through the connection of the device to PoE device (see chapter 5.3).
The device is designed to be assembled with the contact surface parallel to the measurement area (please also see chapter 6.1).
Figure 1: Picture of the IVAS sensor device.
Figure 2: Front and back with labelling. Figure 2: Front and back with labelling.
5
Advertisement
Table of Contents
