Appendix A. Specifications
Optional Accessories
The 8000VA and 11000 UPS units can be ordered with the following optional accessories:
Part Number
Feature Code Description
46M4113
6146
55949BX
A545
Enviornmental Monitoring Probe
Figure 80
shows the Environmental Monitoring Probe (EMP). It needs to be ordered separately.
The EMPs purpose is to report on local environmental temperature and humidity at its installed
location. For example, if the EMP device is installed at the top of a rack, it will report on the
temperature and humidity values at that location.
The device can be installed anywhere on the rack by using either the screws or the self-
adhesive hook-and-loop fasteners. Once attached to the rack, connect the CAT5 cable to the
UPS or a supported PDU Ethernet connector.
Note: The installation of a Network Management Card (NMC) is required for the EMP to be connected
to the device.
274
Environmental Monitoring Probe (EMP)
Extended Battery Module (EBM) (Max qty 4)
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG