Chapter 10 UPS maintenance
Step 6.
If applicable, make sure the battery connectors are connected
Step 7.
Slide the new battery pack into the UPS. Push the battery pack firmly to ensure a proper
connection.
Step 8.
Screw the metal protective cover back onto the unit.
Step 9.
Reinstall the front bezel by tightening the four captive screws.
Note: There is some left-to-right slack in the bezel, so ensure that it is lined up correctly
before tightening the screws.
Step 10. Snap the center section of the bezel into place.
Step 11. Continue to
Replacing the EBM(s)
CAUTION:
The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially trained
persons, a lifting device, or both to safely lift this part or unit. (C011)
126
Testing a new battery
pack.
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG