Advertisement
ORDER GUIDE
Head connection cable is not supplied with the head. Please order it separately.
Heads
Type
Spot type
High
and low
temperature
resistant
High
and low
temperature
resistant
Bar
type
High
and low
temperature
resistant
High
and low
temperature
resistant
High
and low
temperature
resistant
Notes: 1) Typical value in condition of discharge distance 50 mm
2) Typical value in condition of discharge distance 100 mm
(ER-X□HC: 30 Hz) and no air supply.
3)
Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature
change is less than ±10 °C, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.
4)
The ER-X001 and ER-X008 must be combined with the new-type ER-XC02 controller.
For the
Identification of previous-type and new-type controllers and for the combination with the
5) The ER-X□HC high / low temperature resistant type head can be used under temperatures from -60 to +200 °C
in combination with the new-type controller, ER-XC02.
For the
Identification of previous-type and new-type controllers and for the combination with the
Appearance
1 sec. or less
(Note 2)
1.969
in, center of the product, discharge frequency 50 Hz and air supply 60 ℓ/min. (0.3 MPa).
3.937 in
(ER-X001: 50 mm
Charge removal time
Ion balance
(±1,000 V→±100 V)
0.3 sec. or less
(Note 1),
0.5 sec. or less
(Note 2)
±30 V or less
(Note 2, 3)
1.969
in), center of the product, discharge frequency 50 Hz
head, refer to p.16.
head, refer to p.16.
ER-X
SERIES
Area Ionizer
Effective charge
Model No.
removal width
ER-X001
50 mm
1.969 in
approx.
(Note 4)
ER-X008
(Note 4)
80 mm
3.150 in
approx.
ER-X008HC
(Note 5)
ER-X016
160 mm
6.299 in
approx.
ER-X016HC
(Note 5)
ER-X032
320 mm
12.598 in
approx.
ER-X032HC
(Note 5)
ER-X048
480 mm
18.898 in
approx.
ER-X048HC
(Note 5)
ER-X064
640mm
25.197 in
approx.
ER-X064HC
(Note 5)
-76 to +392
°F. Be sure to use this head
7
Advertisement
