Table of Contents
Advertisement
METPOINT
®
CID
9.3 Sensitivity level
Ultrasonic levels can be viewed as a kind of leak "volume."
You can use the "sensitivity adjustment button" to adjust the sensitivity of the METPOINT
surroundings. This will heavily affect the device's acoustic behaviour and increase or reduce the valid value range.
Reducing sensitivity will reduce the range of the leak measurement. However, the "relevant area" illustrated with a circle
on the display will also be smaller, making exact pinpointing much easier.
Sensitivity levels
0 ... 60 dB
10 ... 70 dB
20 ... 80 dB
30 ... 90 dB
40 ... 100 dB
50 ... 110 dB
60 ... 120 dB
Whether the 50 ... 110 dB and 60 ... 120 dB levels are available will depend on whether the METPOINT
sensor are intelligent. The METPOINT
(10 – 70 dB to 40 – 100 dB) by itself.
9.4 Laser ON / OFF
The laser pointer can only be switched on and off with the laser ON / OFF button on the display (not with the membrane
keypad). When switched on, the display will show a laser warning symbol.
14 | 56
The device's maximum sensitivity level (intended for when there are small leaks and no
noise); can be selected with the "HiSn button" or "sensitivity level button"
Leaks and noise will become "quieter" and the range will decrease
Leaks and noise will become "quieter" and the range will decrease
Leaks and noise will become "quieter" and the range will decrease
Least sensitive level (large leaks, a lot of noise for a heavy-duty application)
Leaks and noise will become "quieter" and the range will decrease
Least sensitive level (large leaks, a lot of noise for a heavy-duty application)
CID will have its auto function enabled by default and will switch between levels
®
Laser "ON" icon
Original installation and operation manual
CID to the corresponding
®
®
Please observe all warnings regarding laser
operation! Do not, under any circumstance,
hit a person's or animal's eyes directly or
indirectly (reflection) with the laser beam!
CID and the
Advertisement
Table of Contents
