Table of Contents
Advertisement
System Software
BIOS
Operating System
Windows 9x
The MW-520 system setup program is Phoenix BIOS 4.06, developed by Phoenix
Technologies Ltd. for mobile Pentium II/III based computers.
The BIOS enables running Windows
MW-520 platform. It also provides hardware initialization, system boot, power
management, APM 1.2 or ACPI, Plug & Play registry data-base, and other
features.
The BIOS setup is a program that configures the MW-520 hardware according to
individual needs and saves the configuration into the CMOS memory (see Mobile
Workstation 520, Owner's Manual for more information).
MW-520 may run the following operating systems (depending on the model):
• Windows 98
• Windows NT 4.0
• Windows 2000
• Windows Me
A full set of
files and other necessary software packages/drivers for these
.CAB
operating systems is saved under
Use this directory if you need additional drivers.
To verify Plug & Play operation in the BIOS setup, enter the Advanced Setup
menu, and set the
Installed O/S
special hardware features, Windows 9x includes additional files that were added
by Motorola to support the workstation's special abilities.
.
When adding new applications to the hard drive, please be careful not
!
to remove these files, as this can cause your system to malfunction.
Caution
To support I/O devices shared interrupts with Windows 9x, perform the following
modification in the
SYSTEM.INI
[386enh]
ComIrqSharing=true
98/2000/Me and Windows NT
®
.
C:\SETUP
option to
(default). To support
Windows
file:
System Software
4.0 on the
®
9
Advertisement
Table of Contents
