Huawei NetCol5000-C030 User Manual page 106

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
Menu
System
Settings
Issue 06 (2022-12-15)
Parameter
Cold aisle
temperature and
humidity sharing
Hot aisle
temperature and
humidity sharing
Password
required for start
or shutdown
onsite
Humidifying
function
Dehumidifying
function
DO_1 action
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Power-On Commissioning
Description
This function can be enabled only when at
least one smart cooling product in the
teamwork group is equipped with cold aisle
T/H sensors. If this function is enabled, the
master unit in the teamwork group collects
the cold aisle temperature and humidity
values from all units equipped with cold
aisle sensors, and synchronizes the
temperature and humidity control type and
setpoints to all slave units.
This function can be enabled only when at
least one smart cooling product in the
group is equipped with hot aisle T/H
sensors. If this function is enabled, the
master unit in the teamwork group collects
the hot aisle temperature and humidity
values from all units equipped with hot aisle
sensors, and synchronizes the temperature
and humidity control type and setpoints to
all slave units.
● No: No password is required for startup
or shutdown.
● Yes: A password is required for startup
and shutdown.
● Enable: The device starts humidifying
when the ambient humidity is lower than
the humidity setpoint.
● Enabled when active power supply is
working: The device starts humidifying
only when the active power supply is
used and the ambient humidity is lower
than the humidity setpoint by a certain
range.
● Disable: The humidifying function is
disabled.
● Enable: The device starts dehumidifying
when the ambient humidity is higher
than the humidity setpoint.
● Disable: The dehumidifying function is
disabled.
This parameter can be set to On or Off, and
is used together with DO_1. For details, see
DO_1 description.
97