Mitsubishi Electric AE-200A Instruction Book page 99

Item
■ File output destination
■ File format
[Data type: 5-minute intervals]
Energy management
data
*1 The numbers shown after "MCP" and "MCT" indicate channel No.
*2 The numbers in the parentheses indicate M-NET addresses.
*3 The measurement value of the built-in Pulse Input (PI) to AE-200/AE-50/EW-50 is only MCP1–
*4 The value will not appear if the data does not exist.
*5 Each file contains up to 17856 data (2-month worth of data).
WT07996X02
[Save destination]\[Serial No.]\"OperationalData"\"EnergyManagement2"\[Date]
Note: If the AE-200/AE-50/EW-50 software version is before Ver. 7.2, the file output
destination is [Save destination]\[Serial No.]\"OperationalData"\"EnergyManagement"\
[Date].
Row Item
1st File Type 501
2nd Data range Start date + "–" + End date
"DateTime,Data1(51),...Data1(100),Data2(51),...Data2(100),
Data3(51),...Data3(100),OutdoorTemp(51),...OutdoorTemp(100),
CoolSetTemp(1),...CoolSetTemp(50),HeatSetTemp(1),...HeatSetTemp(50),
RoomTemp(1),...RoomTemp(50),MCP1(0),...MCP1(50),
3rd Item *1*2
MCP2(0),...MCP2(50),MCP3(0),...MCP3(50),MCP4(0),...MCP4(50),
MCT1(1),...MCT1(50),MCT2(1),...MCT2(50),
AHC1(201),...AHC1(250),AHC2(201),...AHC2(250),
MCP1,MCP2,MCP3,MCP4
Data1, Data2, Data3
OutdoorTemp, CoolSetTemp, HeatSetTemp,
Measurement RoomTemp
4th
unit
MCP (PI controller/Built-in Pulse Input (PI))
MCT (AI controller)
AHC (Advanced HVAC CONTROLLER)
Date and time, Data 1 (51), ... (100), Data 2 (51), ... (100), Data 3 (51), ... (100),
Outdoor temperature (51), ... (100),Cooling set temperature (1), ... (50),
5th–
Heating set temperature (1) , ... (50),Room temperature (1), ... (50),
Data *1*2*4*5
MCP 1 (1), ... (50), MCP 2 (1), ... (50), MCP 3 (1), ... (50), MCP 4 (1), ... (50),
17860th
MCT 1 (1), ... (50), MCT 2 (1), ... (50),AHC temperature 1 (201), ... (250),
AHC temperature 2 (201), ... (250), MCP 1, MCP 2, MCP 3, MCP 4
MCP4, and the addresses are not displayed.
Description
Format
*3 "
Item
99
Unit
-
ºC, ºF
kWh, m3, MJ,
Blank
ºC, ºF, %
ºC, ºF