Mitsubishi Electric AE-200A Instruction Book page 124

Item
Display range Select [Block], [Group], [Address], or [Energy management block] to display its data.
Select a centralized controller, and then select a block, group, address, or energy management block to
display its data.
Out of the units that are under the control of the centralized controller selected in [Centralized controller
selection], only the blocks and energy management blocks to which the unit groups managed by tenant
managers belong are displayed.
Display target
WT07996X02
Centralized controller
Display target selection
Target group selection
Note: Tenant managers cannot select all blocks at once in the target block selection screen.
Note: When the display range is [Address], unit addresses are displayed. Names cannot be registered.
Note: When the name has not been registered, the display varies with the display range setting as follows.
Display range
Block
Group
Energy management block
*1 For AE No., refer to 4 "Name Display" in Chapter 1.
Note: Blocks and groups of DIDO controllers (PAC-YG66DCA) are not displayed.
Description
Target block selection
selection
Target address selection
"Block" + AE No. *1 + Block number
"Group" + AE No. + Group number
*1
"Energy mgmt block" + AE No.
124
Target energy management
block selection
Name display
*1 + Energy management block number