Send Mail Log - Mitsubishi Electric AE-200A Instruction Book

2-6-1. Send Mail Log

In [Send Mail Log], a list of error notification e-mail that have been sent can be checked.
Error notification e-mail function is the function to send the error information to the specified e-mail addresses.
To use this function, e-mail settings must be configured in the initial settings. Refer to the Instruction Book (Initial
Settings) for details.
Error code
Error source unit address
Sent date and time
Item
Controller
Clear log
Sent date and time
Error source unit address
Error code
Error Status
Sent Mail Status
WT07996X02
Display target e-mail logs can be narrowed down by selecting a centralized controller.
Click to clear the e-mail log.
Note: Only the e-mail log of the centralized controller selected in [Controller] will be reset.
To clear all logs, select "All controllers."
The date and time when the e-mail was sent will appear.
The centralized controller No. and address of the error source unit will appear.
Note: For address display, refer to 4 "Name Display" in Chapter 1.
Note: When an error occurs on the general equipment connected via DIDO controller (PAC-
YG66DCA), the address of the DIDO controller will appear.
The error code that corresponds to the error will appear.
Occurred: The e-mail was sent when an error occurred.
Resolved: The e-mail was sent when the error was resolved.
Sent: The e-mail was successfully sent.
Failed: The e-mail failed to be sent.
Description
90
Controller
Click to narrow down the
e-mail log to display into
centralized controller units.
Clear log
Click to clear all displayed
e-mail log of the selected
centralized controller at
once.
Sent Mail Status
Error Status