Sony Airpeak S1 Startup Manual page 33

[4] Adjusting the balance of the gimbal
Adjust the balances of the tilt, roll, and pan axes.
Preparation
• Confirm that the camera lens cap is removed.
• Confirm that the camera and gimbal are connected using the USB cable (page 32).
• Turn on the camera to avoid movements of the focus unit in the lens.
• Confirm that the aircraft is turned off.
• Confirm that you have installed all the accessories you want to use.
Roll axis
Tilt axis
1
Adjust the balance of the tilt axis.
Adjust the horizontal and vertical balances of the tilt axis.
Horizontal balance adjustment of the tilt axis
 Loosen the top camera screw and bottom lever, and then slide the camera plate forward or backward to adjust the
balance.
 After adjusting the balance, firmly tighten the top camera screw and bottom lever.
 Rotate the tilt frame by about ±15° to check if the balance is adjusted properly.
If properly adjusted, the tilt frame will stay still or return to the horizontal position.
Tilt frame
Top camera
screw
Pan
axis
Roll axis
Lever Camera plate
33