Linking/Setting Up The Remote Controller And Aircraft - Sony Airpeak S1 Startup Manual

Linking/setting up the remote controller and aircraft

Follow the on-screen instructions in the "Airpeak Flight" app to link the remote controller and aircraft and set up the
aircraft.
Preparation
• Confirm that the mobile device mounted on the remote controller is connected to the internet.
• Charge the built-in remote controller battery sufficiently (page 17).
• Charge both aircraft battery packs sufficiently (page 17).
1
Turn on the remote controller.
Press and hold the  (Power) button for at least 2 sec. to turn on the power. After startup, the status LED stops
flashing and remains on.
2
Turn on the aircraft.
Press and hold the  (Power) button for at least 2 sec. to turn on the power. After startup, the power status LED
stops flashing and remains on.
 (Power) button
3
Tap [Start link] in the "Airpeak Flight" app.
As you proceed with the [Initial setup] procedure in the "Airpeak Flight" app, the [Link remote controller to aircraft]
screen will be displayed. On this screen, tap [Start link] to initiate the process of linking the remote controller and
aircraft.
26
Status LED
 (Power) button
E
LE AS
ER Y RE
BA TT
Power status LED