Mount Allocation Using Fpwin Gr7; Mount Registration Of A Unit To Be Used And The Starting Word Number; Changing The Starting Word Number - Panasonic FP7 Series User Manual

3.3 Mount Allocation Using FPWIN GR7

3.3 Mount Allocation Using FPWIN GR7

3.3.1 Mount Registration of a Unit to be Used and the Starting Word Number

■
What is mount registration?
If all units to be used are physically at hand, you can connect FPWIN GR7 online to the FP7
CPU unit, read the actual mount status, and complete registration.
■
Allocation method
Mount registration of the unit to be used and the initial I/O number are set in the following
procedure.
1.
From the menu bar, select Online>Online Editing.
The screen is switched to the "Online Editing" mode.
2.
Select Option>FP7 Configuration.
3.
Select "I/O Map" in the field.
The "I/O map setting" dialog box will be displayed.
4.
Press the [Mount] button.
The mount status is read, and the read I/O map is registered in the CPU unit.
● Following the mount registration operation, the system automatically reads the unit
attachment status, formulates an I/O map, and enters the initial word number.
● The I/O map that has been mount-registered using FPWIN GR7 is registered into the CPU
unit, together with other project information. If a difference with the actual units and/or
attachment status is identified when power supply is turned on or during operation, such a
difference is reported as a self-diagnosis error.
● If a starting word number is not entered, the system automatically enters one.
● Based on the starting word number allocated to each unit, I/O numbers are allocated.

3.3.2 Changing the Starting Word Number

When you want to change the starting word number following mount registration, please take
the following procedure.
■
Allocation method
Changing the starting word number following mount registration should be performed in the
following procedure. In the following procedure, it is assumed that an I/O map is already
displayed.
3-10 WUME-FP7CPUH-09