Panasonic FP7 Series User Manual page 125

Device No. Name
SR2B Interrupt error flag
SR2C Interrupting flag
PB for execution at a
SR2D specified interval in
progress
SR2E (Not used)
Rewriting during RUN
SR2F
completed
(Note 1) Available from the CPU unit Ver.3.03 or later.
WS3
Device No. Name
SR30 SD slot cover status flag
SD memory card
SR31
attachment flag
SD memory card
SR32
recognition completed flag
SD memory card
SR33
recognition result flag
SD memory card write
SR34
protection flag
SR35 SD memory card type
SD memory card file
SR36
system
SR37 Logging into FTP server
SR38 Logging trace execution
SR39 Logging trace start
SD memory card access
SR3A
instruction active
SD memory card access
SR3B instruction execution
complete
SD memory card access
SR3C
instruction execution result
WUME-FP7CPUH-09
Description
Turns on when an interrupt error occurs.
Turns on when an interrupt program is being executed. Only valid
within a PB for execution at a specified interval or within an INT
program.
Turns on when a PB (program block) for execution at a specified
interval is being executed.
Turns on in the first scan only following completion of rewriting during
RUN.
Description
ON: Cover open
OFF: Cover closed
ON: There is an SD memory card
OFF: No SD memory card
ON: Completed recognition of an SD memory card
OFF: Other than the above
ON: Error
OFF: Normal
ON: Protected
OFF: Not protected
ON: SD
OFF: SDHC
ON: FAT16
OFF: FAT32
Turns on while logging in.
ON: Executing
OFF: Not in operation
ON: Active
OFF: Not in operation
This relay is used to check whether other SD memory card access
instructions are executed or not.
ON: Executing
OFF: Not in operation
This relay is used to check the completion of SD memory card
access instruction with the change of this flag (ON to OFF), and
used to turn off the trigger of the instruction.
ON: Execution complete
OFF: Executing
The execution result of SD memory card access instruction is
stored. Error codes are stored in system data register SD30.
ON: Error
8.1 CPU Unit Specifications
8-13