Table of Contents
Advertisement
11.5.9.4
Function for object type 1-bit for object x
Options:
Send value:
■
–
The value that is fixed via parameter "Value for object x" is sent when the button is
pressed. This means that an On or Off telegram is sent.
Alternating on/off:
■
–
"On" and "Off" are sent alternately at the press of the button.
The parameter is used to specify whether an On or an Off telegram is sent via 1-bit
communication object "Sx: switching x actuation(s)" when the button is pressed.
A further option can be specified as to whether the switching telegrams are sent alternately.
This means that after "On" is sent, "Off" is sent at a renewed press of the button. After it is
pressed again, "On" is sent.
Note
The parameter can only be set if the "Object type for object x" parameter is set
on "1 bit".
Product manual 2CKA001473B9488
Description of application and parameters
Send value
Alternating on/off
Application "Function block x"
│97
Advertisement
Table of Contents
