Options for object type "1 byte":
Options:
Auto:
■
–
Value "0" is sent via the 1-byte object. At each press of the button a linked RTC
switches over between operating modes "Comfort", "Standby" and "ECO". When forced
guidance is activated, selection "Auto" is used to switch over to the standard operating
mode object.
Comfort:
■
–
Value "1" is sent via the 1-byte object and a linked RTC switches over into comfort
mode.
Standby:
■
–
Value "2" is sent via the 1-byte object and a linked RTC switches over into standby
mode.
ECO:
■
–
Value "3" is sent via the 1-byte object and a linked RTC switches over into ECO mode.
Frost/heat protection:
■
–
Value "4" is sent via the 1-byte object and a linked RTC switches over into frost/heat
protection mode.
The parameter is used to specify the operating mode which is sent via communication object
"Sx: operating mode" at the press of the button.
Product manual 2CKA001473B9488
Description of application and parameters
Auto
Comfort
Standby
ECO
Frost/heat protection
Application "Function block x"
│104