Canon imageRUNNER 1750 Series Service Manual page 327

10) Install the Card Reader Harness [1] to the Main Controller.
• 7 Wire Saddles [2]
• 1 Connector [3]
• 1 Edge Saddle [4]
[2]
x8
[1]
[2]
11) Cut off the [A] part of the Reader Right Rear Cover with nippers.
• 3 Joints [1]
CAUTION:
Be sure to check that there is no burr.
9
Installation > Copy Card Reader-F1 > Installation Procedure > Installing the Card Reader Kit
[3]
[4]
[2]
F-9-59
[1]
[A]
[1]
F-9-60
9 Installation > Copy Card Reader-F1 > Installation Procedure > Installing the Card Reader Kit
12) Pass the Card Reader Harness [1] through the [A] part of the Reader Right rear Cover,
and return the Reader Right Rear Cover [2] to its original position.
• 2 Protrusions [3]
• 1 Screw [4] (Use the screws removed in "Removing the Covers" step 7.)
[3]
[4] [2]
13) Close the DADF Unit and the Right Door Unit.
9-19
[1]
[A]
F-9-61
9-19