Siemens SIMATIC S7-1500 System Manual page 160

②
Regarding : Submenu names
The following table shows the available submenus of the display.
Table 13- 2
Main menu items
S7-1500 Automation System
System Manual, 02/2014, A5E03461182-AB
Submenu names
Meaning
Overview
Diagnostics
Settings
Modules
Display
Description
The "Overview" menu contains information about the
properties of the CPU and the properties of the inserted
SIMATIC memory card.
The "Diagnostics" menu contains information about
diagnostics alarms, the diagnostics description, a read access
to monitoring and force tables, and the display of the
interrupts. Additionally there is information about the network
properties of each of the CPU's interfaces.
In the "Settings" menu, IP addresses of the CPU are
assigned, the date, time of day, time zones, operating modes
(RUN/STOP) and protection levels are set, a memory reset
and reset to factory settings can be performed on the CPU,
and the status of firmware updates displayed.
The "Modules" menu contains information about the modules
that are used in your configuration. The modules can be
centrally or peripherally deployed.
Peripherally deployed modules are connected to the CPU via
PROFINET and/or PROFIBUS.
You can set the IP addresses for a CP/CM here.
In the "Display" menu you can configure settings related to the
display, such as language setting, brightness and energy-
saving mode. The energy-saving mode darkens the display.
The standby mode switches the display off.
Display of the CPU
159