Toshiba Aquilion TSX-101A/I Series Site Planning Manual page 10

(7) Site environment
(a) Ambient temperature, humidity, and calorific value
Table 4-1 Heat generation by units and environmental conditions
Names of rooms
and units
1. Scanning room
• Gantry
• Patient couch
2. Scan control room
• Console
*1 Maximum heat generation is the heat that is generated when continuous scanning is
performed at the maximum output rating of the unit.
*2 Normal heat generation is the heat that is generated when scanning is not
performed.
*3 1 kW = 860 kcal/h, 1 cal = 4.19 J
*4 A temperature from 0°C to 40°C is permissible if the units are not operated.
(b) Vibration
0.98 m/s
(c) Floor construction
Reinforced concrete structure
(d) Explosion-proof structure
This system is not explosion-proof. Therefore, do not use flammable or explosive gases
near the system.
(e) Other
Check for evidence of excessive dust or dirt.
Maximum heat Normal heat
generation *1 generation *2
[kW] [kJ/h] *3
(10.5) (37,800)
10.0 36,000
0.5 1,800
(8.0) (28,827)
8.0 28,827
2
(0.1 G) or less
[kW] [kJ/h]
Temperature *4 (°C)
(4.3) (15,480)
18°C to 28°C where
median value is 20°C
4.0 14,400
to 26°C. Fluctuation
0.3 1,080
around the median
not to exceed ±2°C.
(8.0) (21,600)
16°C to 28°C
8.0 21,600
10
No. 2A201-519EN*A
Environmental conditions
Relative humidity (%)
40% to 80%
(No condensation)
40% to 80%
(No condensation)