Table of Contents
Advertisement
GS4000 Installation Guide Revision 4.00
Step 2
Open the big levers (not the small ones) towards the direction indicated in Figure
5.5-2 below. (The basic control unit will come out 15mm or so towards you.)
Lever
Figure 5.5-2
*
*
5-38
Basic Control Unit Unlocked
NOTE: When removing a Basic Control Unit from the slot, do it holding its levers so
that its connector part is detached smoothly. When moving levers, do it slowly
without giving much pressure to them.
NOTE: The small levers, which are located above the big ones, are not used for the
purpose of unlocking a Basic Control Unit; therefore do not try to open them
forcibly.
Lever
520-10-026-30X
Advertisement
Table of Contents
