Sony HKCA-700 Operation Manual page 42

Assembly
6
Lifting the rear of the camera
slightly, fit the lens into the
lens mount and tighten the lens
lock lever. If the camera and
lens positions do not align
properly, turn the height
adjustment ring on the bottom
of the HKCA-700 to adjust the
camera height.
7
Turn the height adjustment
ring to adjust the camera height
(see step 6) until the lens lock
lever moves smoothly.
8
When the camera position is
correct, tighten the lock ring
and lock lever to secure the
camera.
9
Connect the camera adapter
connection cable to the camera
adapter's EXT I/O connector,
as shown in the figure.
16(E)
Height adjustment ring
If the camera and lens do not align
Lock lever
Camera adapter
connection cable
Lens lock lever
Lock ring
2 Couple up the connectors.
Pin
CA connector
1 Insert the pin on the CA
connector into the hole in the
EXT I/O connector.
EXT I/O
connector
Hole